Our heated grips are compatible with a large range of motorcycles, however there are few instances which you should check.

Do you have a BMW motorcycle?

Most modern BMWs are only compatible being connected directly to the motorcycle battery due to the proprietary canbus system.

Do you have ride by wire throttle?

If so then our heated grips are not compatible out of the box and need some modification. A quick search of your "bike mode + year + ride by wire"

Check your existing grips, ensure if a spacer is used you measure the full length including spacer.

Whilst you can install these grips directly to the bike’s battery if you like, we strongly recommend wiring them to the live feed to ensure they don’t draw any power when the bike is switched off. This fitting method requires some knowledge of the electrical wiring, so we would advise you take them to a motorcycle garage to avoid any mishaps. If you feel confident enough to install them yourself, you should expect to have the install complete in about 1.5 hours. In case of any issues with the install, there is also a low battery sensor built into the grips which will automatically shut them off to stop them from draining the battery.

Automatic cut off if voltage falls to below 11.5V

1. Level 1: 17W
2. Level 2: 21W
3. Level 3: 24W
4. Level 4: 27W
5. Level 5: 30W

4 amp

120mm / 22mm (most common)

130mm / 22mm